Bases and Hardware

Hardware

FL 2
FL-2
$28
For the PL2T, SB-2 and HB-1
The optional FL-2 Flange Mount allows the PL2T to be permanently mounted to a desk or table top using three (supplied) screws. The Heil FL-2 Flange Mount also has a security lock, so the PL2T can be tightened to the exact position desired. The brass insert accepts a 1/2" Stem.
Click here for product dimensions.
 

 

RS 1
RS 1
$28
For the PL2T, SB-2 and HB-1
The RS-1 is a 12" riser that allows you to mount the Heil PL2T behind your desk top equipment and pull the PL2T over to you. It's a very classy way to position your Heil microphone. The brass insert accepts a 1/2" Stem.
Click here for product dimensions.
 

 

DT 1
DT 1
$35
For the PL2T, SB-2 and HB-1
The DT-1 is a flush mount for the PL2T. Drill a 1.5" hole in the desk top, then tighten the large washer and nut of the DT-1 from below the desk. This creates the ultimate in a classy mount for all Heil booms. The brass insert accepts a 1/2" Stem. Requires a 1.5" hole for mounting and will mount to surfaces 1/2" - 2" thick.
Click here for product dimensions.
 

 

WM 1
WM 1
$22
For Heil booms
The WM-1 is a unique mount for the Heil booms that allows them to be mounted on a vertical surface. The brass insert of the WM-1 insures smooth, perfect fit. The brass insert accepts a 1/2" Stem.
Click here for product dimensions.
 

 

C-Clamp
C Clamp
$22
Replacement C-clamp
The ideal way to mount your PL2T, SB-2 or HB-1 boom when space is at a premium. Brass insert for smooth, low friction from side to side. Brass insert accepts up to 1/2"/13mm stem. Easily mounts to work surface up to 2"/50.8mm thick.
Click here for product dimensions.