For the PL2T, SB-2 and HB-1 The optional FL-2 Flange Mount allows the PL2T to be permanently mounted to a desk or table top using three (supplied) screws. The Heil FL-2 Flange Mount also has a security lock, so the PL2T can be tightened to the exact position desired. The brass insert accepts a 1/2" Stem.
- RS 1
For the PL2T, SB-2 and HB-1 The RS-1 is a 12" riser that allows you to mount the Heil PL2T behind your desk top equipment and pull the PL2T over to you. It's a very classy way to position your Heil microphone. The brass insert accepts a 1/2" Stem.
- DT 1
For the PL2T, SB-2 and HB-1 The DT-1 is a flush mount for the PL2T. Drill a 1.5" hole in the desk top, then tighten the large washer and nut of the DT-1 from below the desk. This creates the ultimate in a classy mount for all Heil booms. The brass insert accepts a 1/2" Stem. Requires a 1 5/8" hole for mounting and will mount to surfaces 1/2" - 2" thick.
- WM 1
For Heil booms The WM-1 is a unique mount for the Heil booms that allows them to be mounted on a vertical surface. The brass insert of the WM-1 insures smooth, perfect fit. The brass insert accepts a 1/2" Stem.
- C Clamp